Disinfectant Hyperox, 20 litres

Hyperox is a professional product that provides great application flexibility as a general surface treatment or used with water delivery system equipment and thermal fogging disinfection. Based on Hydrogen peroxide and Peracetic acid, the product comes with a superior stabilised formula, assuring a broad spectrum activity with high efficacy against viruses, bacteria, fungi and spores. Peracetic acid is an organic compound that is characterized by a very rapid action against all microorganisms. One unique advantage of the active ingredient is that it remains effective in the presence of organic matter even at low temperatures. Hydrogen peroxide is a chemical compound used to remove organic impurities and in advanced oxidation processing it degrades organic compounds, including those that are ordinarily robust, such as aromatic or halogenated compounds.

Features:
- Professional use only;
- Active ingredient Hydrogen peroxide and Peracetic acid 20%;
- Colourless liquid formulation;
- Unique, stabilized peracetic acid formulation;
- Flexible: may be used indoors and outdoors;
- Biodegradable readily within the environment formula;
- Remarkable biocidal action;
- Non-tainting;
- Broad spectrum decontamination against viruses, mycobacteria, bacteria, yeasts and bacterial spores;
- Exceptional effectiveness at low temperatures;
- Highly effective in the presence of organic challenge.

This product can be used:
- Indoor, as well as outdoor use;
- In and around animal housing and every day disinfection, such as drains or for foot dips.

How to use:
- Use at a 1% dilution rate: Add 10ml of Hyperox concentrate to every litre of water;
- For surface and equipment disinfection use a pressure washer or another mechanical spraying device;
- Spray solution at an application rate of 10 oz per square feet and wait at least 30 minutes for a minimum contact time;
- For water system disinfection isolate header tank at the mains and drain off drinker points farthest from the tank;
- Clean out any gross soiling;
- Refill with water and add the appropriate volume of solution;
- Leave for 10 minutes the flush through to all drain off points and leave for 50 minutes;
- Drain entire system before refilling with clean water.

Check the Application Dilution Table.
Follow manufacturer's instructions and read the entire Conditions, Disclaimer and Directions for Use.