FlyMiniSlim 30S

The FLY MINI SLIM 30S electric device is designed to quickly monitor and capture flying insects.

It uses the synergistic effect of the adhesive board impregnated with pheromones, combined with the attraction due to the actinic tubes that emit a special UV light on a certain wavelength, which make this light attractive to insects.

By using adhesive boards, two other objectives are achieved:
- observance of hygiene norms (HACCP norms);
- compliance with the provisions of the European Community (EC rules).

Trap maintenance:
-It requires virtually no intervention, however make sure the electrical connection is in order and the tubes are working.
-The metal surfaces are periodically wiped with a slightly damp cloth to remove any deposited impurities and to keep the pleasant appearance of the device.
-The intervals are established according to the degree of dirt of the area in which the device works.
-The adhesive plate is replaced after 4 weeks, and the actinic tubes are replaced after 12 months of operation.
-Careful! Replacement times may change depending on operating conditions - a dirty area will adversely affect the replacement period.

Technical specifications:
-Material: Stainless steel housing
-Coverage: 80 sqm
-Tubes: 2 x 15 W
-Contains: 1 adhesive board with pheromones for a double attraction
-Dimensions: 32 x 19 x 7.5 cm
-Warranty: 2 years

FlyMiniSlim 30S can be used together with fly mini slim 30 adhesive board.

Fly mini slim 30 adhesive board is purchased separately.