Disinfectant Sanosil Super 25 Ag, 12 litres

Sanosil Super 25 Ag, 12 litres is a water system and surface disinfectant, ideal against highly contaminated surfaces and organically contaminated surfaces. The formula allows the product to deliver powerful cleaning action, even where pre-cleanings are limited.

Benefits:
- Ideal for medical use, veterinary use, water systems, and contagious mediums;
- Effective against viruses, bacteria, fungi and molds, endospore, and protozoans;
- Ready to use and cost-effective;
- Environmentally friendly;
- Does not contain alcohol, dyes, perfume, or chlorine.

Action mode:
Sanosil Super 25 Ag efficiently disinfects and cleans surfaces:
- Can be used in situations where pre-cleanings can be performed only to a limited extent, areas where organic or microbiological burdens are strong, and areas where the disinfection exposure limit is short;
- The active substance, hydrogen peroxide is stabilized and enhanced using silver, thus gaining increased effectiveness against microorganisms;
- Silver remains active for a long time for lasting protection against new contaminations.

Methods of application and dosage:
Low contamination treatments - 20 ml Sanosil Super 25 Ag with 1 l of water.
High contamination treatments - 60 ml Sanosil Super 25 Ag with 1 l of water.
Low contamination treatments - 100 ml Sanosil Super 25 Ag with 1 l of water.
Endospore treatments - 120-150 ml Sanosil Super 25 Ag with 1 l of water.

Compatibility:
- Keep in mind it's a Silver and Hydrogen peroxide formula.

Recommendations:
- Sanosil Super can be used for both cold and hot water treatments.
- Dosing should be done with proportional dosing systems.
- Use 1 l per m3 for pipe treatments(shock treatments).
- Empty the solution into the pipe system and allow it to act for 12-24 hours. The solution can be flushed into the sewage system after treatment.
- Use 100 ml per m3 of Sanosil Super 25 AG for water disinfection (water towers, irrigation systems). The required action time is between 15 minutes and 12 hours.
- Use 1 l per 32 l of water for normal water disinfection, 50-100 ml/m2.
- Use 1 l per 15 l of water for high water disinfection, 50-100 ml/m2, 75-150 ml/m2.

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.