Disinfectant Sanosil S010 Ag, 1 litre

Sanosil S010 Ag, 1 litre is a surface disinfectant designed to work well against highly contaminated surfaces and organically contaminated surfaces. The formula allows the product to deliver powerful cleaning action, even where pre-cleanings are limited.

Benefits:
- Ideal for medical use, veterinary use, water restoration, and highly contagious scenarios;
- Effective against viruses, bacteria, fungi and molds, endospore, and protozoans;
- Silver and Hydrogen peroxide formula;
- Ready to use;
- Environmentally friendly;
- Does not contain alcohol, dyes, perfume, or chlorine.

Action mode:
Sanosil S010 efficiently disinfects and cleans surfaces:
- Can be used in situations where pre-cleanings can be performed only to a limited extent, areas where organic or microbiological burdens are strong, and areas where the disinfection exposure limit is short;
- The active substance used is hydrogen peroxide. It is stabilized and enhanced with silver thus gaining increased effectiveness against microorganisms;
- Attacks the cell walls of the mold by direct contact. This allows silver ions to enter the cell freely and forms close covalent bonds with cellular protein that remains inactive and enables the annihilation of cells and mycelium.

Methods of application:
- If possible, isolate the area that is to be treated.
- Before disinfecting, treat mold spots using 50 to 100 ml of Sanosil S010. Allow the solution to act for 2 to 4 hours, with 99% of molds being eliminated within 60 minutes.
- Use a plastic brush soaked with Sanosil S010 together with hot water and a small amount of dishwasher detergent to scrape and remove any mold that remains.
- Perform a second treatment to eliminate the remaining mold. After the second treatment, do not wash the surface.
Vacuum the entire area.

Dosage:
Low level contaminations - 50 to 100 ml/m2.
High level contaminations - 100 to 200 ml/m2.

Compatibility:
- Over the course of the tests, Sanosil found good compatibility with all materials with the exception of copper and mild steel. These materials saw noticeable changes and are not recommeneded for use with product.

Recommendations:
- Use proper protective equipment when using Sanosil S010 Ag.

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.