Climax 757

The Climax 757 half-mask offers protection against gases, vapors, and particles.

The mask is made of soft silicone and is equipped with an outlet valve and two filter connections, which are fixed laterally by bayonet mounting.

The exhaust valve consists of a valve holder and a diaphragm, which facilitates the evacuation of expired air.

The Climax 757 is equipped with head and neck fastening straps, which can be easily adjusted for increased comfort.

The mask is used together with the special Climax 757-N filters and complies with the safety requirements provided by the EN 140: 1999 standard.

Rated protection factor (MFN): 50

Instructions for use:
-Place the mask around your neck;
-Grasp the upper elastic band of the harness;
-Place your chin in position, in a mask;
-Place the upper elastic band above the head and the lower one at the nape of the neck;
-Adjust the length of the harness by adjusting the upper and lower band (the adjustment is done only once);
-The elastic bands must not be twisted or cover the ears;
-Perform a leak test:

To check that the mask is in place, take the packaged filters completely (without removing them from their packaging) and screw them into the connections. Take a deep breath and hold your breath. If the mask is not tight, then it will peel off on its own. If necessary, readjust the harness and repeat the test.

Connect the Climax 757-N special filters to the mask in the appropriate location.

Climax 757-N special filters are purchased separately.