Bird spikes Polix 30/2 rows

Spikes against birds are the ideal solution, gentle but effective, for removing birds from spaces such as balconies, roofs, cornices, window sills, historical monuments, bridges, or eaves.

Prevent parking, nesting, or deposition of corrosive materials (excrement), preventing their placement in the protected area, without injuring the birds. It simply acts as a barrier, making it difficult for birds or pigeons to approach the edge they used before. After a certain period, the birds will definitely avoid the protected areas.

The spikes are made of UV resistant polycarbonate and can be used for several seasons, having a high resistance to direct sunlight. It does not oxidize and resists very well to atmospheric agents, whether it is moisture, rain, or snow.

The total length of the strip is 33.4 cm, three strips covering one meter. If the edge is wider than 10 cm, you can add a second row of spikes, leaving a space of no more than 3 cm between the tips of the spikes.

Benefits:
-Keep pigeons and other annoying birds at bay: they prevent the formation of nests and the deposition of excrement;
-Discreet and resistant: it does not oxidize and resists very well to atmospheric agents, whether it is moisture, rain or snow;
-They can be easily installed with dowels/screws or silicone adhesive, depending on the support material, on any flat surface (fence, railing, roof, hall, wall, sill, gate, etc.).

Technical specifications:
-Spike material: UV resistant polycarbonate
-Base material: UV resistant polycarbonate
-Number of rows: 2
-Height of spikes: 10.9 cm
-Spike thickness: 3 mm at the base and 1 mm towards the top
-Protected surface (length x width): 33.4 x 10 cm

Fixing:
silicone, screws, nails, screws.

Combat activity:
pigeons and other fliers

Use:
They can be placed on cornices, edges, sills

Installation instructions:
-The spikes against birds and pigeons are easy and simple to install, without the need for professional pest control equipment.
-They can be mounted on almost any surface, by gluing with adhesive or silicone, or by fixing with screws through the holes specially attached to their base, depending on the support material.
-When mounting with adhesive, it is necessary to pre-clean the surface on which it is mounted.
-Their base can be easily attached to beams, bridges, and building edges so that birds can no longer find a flat surface to sit on. Along the base are 10 cross-shaped holes. When the spikes are pressed to an edge, the silicone passes through the holes that form cross-shaped rivets, which lock the spikes firmly in place.
-Along the plastic base are sections that can be broken, or that can be separated with your fingers, the spikes can be easily adjusted, depending on your needs.