Teplast 20/64, Bird Spikes

20/64 anti-bird spikes represent the ideal solution, efficient but gentle, for removing birds from spaces such as fences, eaves, railings or edges.

Easy to use, the spikes prevent standing, nesting or depositing corrosive materials (excrement), preventing their placement in the protected area, without injuring the birds. After a certain period, they will definitely avoid protected areas.

Benefits:
-UV stabilized polycarbonate base;
-can be installed on any surface;
-spikes made of stainless steel AISI 302 Ø 0.13;
-according to the AFNOR X10CRNI18-8 standard;
-according to ISO 527, ISO 178, ISO 306 standards.

AISI 302 Ø 0.13 stainless steel is non-magnetic and its alloy has superior corrosion resistance qualities.

Characteristics:
-Protected surface: 15 - 20 cm
-Number of spikes per linear meter: 64

Properties:
-Tensile strength: 26 N / mm²
-Elongation at break: 250 N / mm²
-Flexural strength: 40 N / mm²
-Flexible modulus of elasticity: 1450 N / mm²
-Ball indentation hardness H132 / 30: 40 N / mm²
-Soaking temperature: 83 ° C VST / A / 50
-Thermal conductivity: 0.12 W / m.K

Installation instructions:
The installation of the spikes must be done with the application of silicone adhesive. They must always be glued on a dry, dust-free and solvent-free surface with an installation temperature between + 5 ° C and + 40 ° C and a working temperature between -50 ° C and + 120 ° C. If the surface cannot be cleaned, you can adjust the tips using nails or screws. Always spread a line of glue at least 0.5 mm wide, based on the tips. Never apply a line of adhesive longer than one meter on the surface you want to protect (terrace, roof, etc.). The adhesive can dry quickly before the base is positioned, preventing the spikes from adhering properly to the glue. Dry completely in 5 to 8 hours. For installations on wet surfaces, you must use a special quick-drying adhesive (MS Polymer).