Product information
The FLY SOFT electrical device is designed to quickly monitor and capture flying insects, using the synergistic effect of the Soft 18, nouss 18 pheromone-impregnated adhesive board and the 18W actin tube that emits a special UV light over a certain wavelength, attractive light for insects.
Use:
companies from the Ho.Re.Ca sector. and private homes
Way of ussage:
-The device can be mounted in various positions, both horizontally and vertically, preferably on a white wall to make the most of its reflection.
-To connect the device, a single-phase 220 V AC socket is required, provided with the earth connection.
-After mounting the real board and establishing the electrical connection, the tubes start to light up and the device is ready for operation.
-The metal surfaces are periodically wiped with a slightly damp cloth to remove any deposited impurities and to keep the pleasant appearance of the device.
-The intervals are established according to the degree of dirt of the area in which the device works. The adhesive plate is replaced after 4 weeks, and the actinic tubes are replaced after 12 months of operation.
-Careful! Replacement times may change depending on operating conditions - a dirty area will adversely affect the replacement period.
In order to obtain the optimal results, the following indications will be observed:
-Do not use outdoors or in locations with dirty environments (excess dust, cereal flour, etc.);
-Install the device near a 220 V AC power supply and power it;
-Install the device at a sufficient height to be protected from personnel and production traffic, but not too high to allow easy monitoring and maintenance (practically about 2m high);
-Install a sufficient number of devices, depending on their protected surface and depending on the configuration of the rooms, avoiding a mounting position that puts the device directly under the action of the sun's rays;
-Avoid as much as possible the presence of obstacles between the device and the protected area, checking practically the visibility of the light from all points of the protected area;
-Ensure continuous operation (24 hours a day).
-The electroinsecticide FlySoft 18S can be used together with Soft 18 adhesive board, nouss 18.
-Soft 18, nouss 18 adhesive board is purchased separately.
Technical specifications:
-Material: stainless steel
-Tubes: actinic 1 x 18 W
-Adhesive boards: 1 pc. inside
-Coverage: 30 sqm on the wall
-Dimensions: 30 x 12.5 x 33 cm
Installation: on the wall with dowel and screws
Target: flies, mosquitoes, flying insects
Additional Information
Manufacturer | EU |
---|---|
Packaging | 1 piece |
Destination use | Population, Professionals, Trained personnel |
Formulations | Metal |
Trap type | Ultraviolet light |
Power in W | 18 W |
Protected Surface | 21 - 50 mp |
Color | Grey |
Get rid of | Flies, Mosquitoes |
Reusable | Can be |
Power | Grid |
Dimensions | 30 x 12.5 x 33 cm |
Usage Area | Indoor |