Fly Easy 72S

Fly Easy 72S is a professional electro insecticide with an adhesive plate designed for monitoring and capturing flying insects. This device uses the synergistic effect of the adhesive board impregnated with pheromones, combined with the attraction due to the actinic tubes that emit a special UV light on a certain wavelength that make this light attractive to insects.

Properties & Benefits:
- It quickly monitors and captures flying insects
- Pleasant design effect
- Tube power: 2 x 36W
- Material: stainless steel
- Coverage area: 240 sqm.
- Dimensions: 61.8 x 29.8 x 16.5 cm
- Warranty: 2 years
- Compatible with PRO 40-80 Adhesive Board (PRO 40-80 adhesive board is purchased separately)

Way of usage & Placement:
- It works for ceiling mounting;
- Mount it on the wall horizontally, vertically;
- The mask (additional component) is not mandatory in the ceiling position, but is recommended for tube protection. However, when mounting the device on the wall, its use is mandatory;
Maintenance:
- It doesn't require. However always make sure that the electrical connection is in order and the tubes work.
- The metal surfaces are periodically wiped with a slightly damp cloth to remove any impurities and to keep the device looking good.
- The intervals are set according to the degree of infestation of the area in which the device operates.
- Replaces the adhesive plate after 4 weeks. Actin tubes are replaced after 12 months of operation.
- Careful! Replacement times may vary depending on operating conditions - a dirty area will adversely affect the replacement period.

Other tips & recommendations:
- For optimal results do not use outdoors or in places with excess dust, cereal flour, etc.;
- Install it near a 220V power supply;
- Install the device at a sufficient height to be protected from personnel and production traffic, but not too high to allow easy monitoring and maintenance (practically about 2 meters high);
- Install a sufficient number of devices, depending on their protected surface and depending on the configuration of the rooms, avoiding a mounting position that puts the device directly under the action of the sun's rays;
- Avoid as much as possible the presence of obstacles between the device and the area to be protected, practically checking the visibility of light from all points of the protected area;
- Ensure continuous operation of the device (24 hours a day).

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.