Disinfectant Virusolve+, 5 litres

Virusolve+, 5 litres is a powerful disinfectant, highly effective against a wide range of bacteria, fungi, mycobacteria, and viruses (including Coronavirus.)

Benefits:
- Disinfection and cleaning effects;
- Low toxicity level (no chlorine or aldehydes);
- Wide range of applications;
- Effective against spores;
- Versatile, cost-efficient, and easy to use;
- Laboratory tested and certified.

Action mode:
Virusolve+ eliminates the risk of cross-infection with viruses, spores, and bacteria:
- The complex mix of dodecylamine, solvents, and biodegradable detergents offers top-level cleaning and disinfection action against viruses, bacteria, etc;
- Kills microorganisms and prevents the build-up of resistance.

Methods of application
- For surface cleaning dilute 5 to 50 ml of Virusolve+ with 1 l of water(20°C).
- Dispense the solution onto the treated surface and wipe gently using a clean towel or no-lint cloth.
- Allow the solution to act for 1 minute before wiping clean or using a brush to remove organic matter.
- Rinse the surface using clean water.
- For non-immersible medical devices, apply Virusolve+ to a clean cloth and wipe the equipment, allowing a period of 1 to 5 minutes for the solution to take effect.
- Rinse the device or surface using a damp cloth.

Compatibility:
Highly compatible with most medical instruments and materials.

Recommendations:
Manual disinfection:
- First wash the medical devices carefully with an enzymatic detergent and rinse. Then dilute Virusolve + 50 ml to 1 liter of water. Soak the instruments in the solution for 5-10 minutes and make sure that all surfaces are covered. In this way the bactericidal, fungicidal, sporicidal, virucidal and mycobactericidal spectrum is ensured. Rinse the instruments with sterile water and wipe with a clean gauze.
Cleaning surfaces in general and in medical units:
- Virusolve + can be dissolved in a concentration of 0.5% in case of a low level disinfection and can be used in a concentration of 5% for a high level disinfection. Spray the prepared solution directly on the treated surface and then gently wipe with a dry gauze. Allow the solution to act for at least 1 minute before wiping or brushing to remove grease or organic debris. In case of persistent stains, a rigid brush can be used. If necessary, rinse with water.

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.