Proman, 15 litres

PROMAN is a selective pre-emergence herbicide designed for the control of annual broad-leaved weeds and annual grasses in potatoes. The product is mainly absorbed by the roots and transported acropetally within the plant after uptake. PROMAN acts by inhibiting photosynthesis in susceptible weeds.

Benefits:
- Efficient for broad-leaved weeds;
- Fast absorption;
- Efficient on all varieties of potatoes.

Action mode:
- PROMAN acts by inhibiting photosynthesis in susceptible weeds.

Methods of application:
Apply PROMAN at a dose rate of 3 to 4 liters product/ha (see weed susceptibility table for selection of correct dose). The higher dose rate should be used on heavy soils with high clay content. The maximum number of treatments per crop: One.

WATER VOLUME AND SPRAY QUALITY:
- Apply in 200 to 600 L of water per ha using a medium spray quality as defined by BCPC.

SOIL TYPE:
- PROMAN is recommended for use on all soil types. Optimum efficacy is achieved when applied to moist soil. The efficacy of PROMAN may be reduced when applied to soils with a high organic matter content (>10%).

MIXING AND APPLICATION:
- Before using PROMAN, make sure the spray equipment is clean.
- Shake the container well before use.

Compatibility:
Consult Belchim Crop Protection before tank mixing other adjuvants or other pesticides.

Recommendation:
- Never prepare more spray solution than required.
- Half fill the spray tank with water and commence agitation.
- Add the required quantity of product to the spray tank and complete filling, maintaining agitation until spraying is completed.
- On emptying the product container, rinse the container thoroughly by using an integrated pressure rinsing device or manually rinsing three times when empty. Add washings to the sprayer at the time of filling and dispose of containers safely.
- In preparation of a spray solution, use it as soon as practically possible.

SPRAY TANK CLEANOUT:
- Wash thoroughly (three times) all application equipment and contaminated clothing.
- Make sure that all liquid is removed from the sprayer tank, pump, and hoses.
- Remove nozzles, open tank, and drain pump to allow free access of air to all parts of the system.
- Do not rinse contaminated washings from application equipment into wastewater channels.
- Contaminated cleaning liquids should be disposed of safely according to local regulations.
- Read the sprayer manufacturer’s instructions before beginning to wash out sprayers.

Please be sure to read, understand, and follow the full Conditions, Disclaimer, and Directions for Use. Use the appropriate personal safety equipment if required and when needed.